MX Fuel REDLITHIUM 6.0 AH BATTERY designs to protect against drops, vibration, water, and extreme temperatures charging time 45-90 minute
MX Fuel REDLITHIUM 3.0 AH BATTERY designs to protect against drops, vibration, water, and extreme temperatures charging time 45-60 minute
MX Fuel Tower light AC/DC light output up to 27000 lumens in AC and up to 20000 lumens in DC height extendable up to 3.10 m IP55 rating (DC only) AC voltage 220-240 V (Tool Only)
MX Fuel Power supply provides 3600 peak watts and 1800 continuous watts output 16A Operates with one or two batteries for extended run time (Tool Only)
Trolley for FOR MXF DH2528H with large rubber wheels, on-board spring-loaded storage locations for 4 chisels and battery/charger storage dock
MX Fuel Demolition Hammer 25 kg class with hexagon demolition hammer size 28 mm full load hammer action 1300 BPM sound level 105 dB LWA (Tool Only)
Core drilling stand for MXF DCD150 with angle indication on base plate can be variably tilted from 0-45 degree base size 276 x 467 mm height 892 mm stroke length 570 mm
MX Fuel Core drill max 150 mm with AUTOSTOP clutch preventing over rotating Speed 1: up to 75 mm diameter at 1600 rpm Speed 2: 76 to 152 mm diameter at 800 rpm (Tool Only)
MX Fuel Cut-Off saw cart to use with MXF COS350 height-adjustable on-board spare battery storage supplied with 11.4 l gravity feed tank
MX Fuel Cut-Off saw blade diameter 350 mm bore size 20/25.4 mm no load speed 5370 rpm max cutting depth 125 mm (Tool Only)
M18 Fuel Hydraulic cable crimper crimps connectors up to 300 sq.mm in less than 5 seconds with 60 kN of force with 350 degree rotatable head crimping range 16-300 sq.mm (Tool Only)
M18 Fuel Compact transfer pump flow rate of 30.3 l/min male thread reception 3/8 inch BSPT inlet hose with 19 mm inner diameter is recommended suction height 5.5 m and max head height up to 23 m (Tool Only)
M18 Fuel Grease gun with max pressure 690 bar flexible hose length 1220 mm 2-Speed modes 103.5/295.7 ml/min grease capacity 400 ml cartridge, 473 ml bulk (Tool Only)
M18 Fuel HVAC Vacuum pump 5 CFM with 1/2-3/8-1/4 inch ports and an additional adaptor 5/16 inch ultimate vacuum 25 micron (Tool Only)
M18 Fuel Inflator with automatic shut-off at selected pressure max 150 PSI display 3 units of measurement PSI/KPA/BAR hose length 920 mm (Tool Only)
M18 Fuel Dual-battery Self-Propelled lawn mower cutting capacity 53 cm 7-level height adjustment 25-100 mm with 5-speed settings up to 6.4 km/h Three-in-one grass management, grass mulching, grass bag collection, side grass drainage (Tool Only)
M18 Fuel Pruning saw brushless motor adjustable speed trigger up to 5 m/s chain bar length 20 cm with automatic oiler for ease of use and proper chain lubrication (Tool Only)
M18 Fuel Backpack lawn mower brushless motor 2 speed modes 0-4900/6200 rpm with 4-tooth cutter blade diameter 230 mm length 1830 mm (Tool Only)
QUIK-LOK Brush cutter attachment 4-tooth blade with 23 cm diameter to cut overgrown areas
M18 Fuel Dual battery blower brushless motor delivers 17 m3/min full throttle within 1 second with a consistent blowing force of 17.7 N (Tool Only)
M18 Fuel Random orbital polisher with 8-speed dial from 2650-5100 rpm diameter of orbit 15 mm backing pad diameter 125 mm 90 degree rotated battery slot for more clearance to prevent any touch points with the paint (Tool Only)
M18 Fuel Polisher brushless motor with 8-stage variable speed 360-2200 rpm spindle size M14 polish pad max 180 mm backing pad max 125 mm (Tool Only)
M18 Fuel Belt sander brushless motor with variable speed adjustable belt speed range from 210 to 410 m/min Tool-free belt change design belt size 75 x 457 mm (Tool Only)
M18 Fuel orbital sander with variable speed dial to adjustment from 13K to 11K OPM Orbit diameter of 1.6 mm Equipped with durable dust bag and universal hose adapter sand paper size 113 x 104 mm (Tool Only)
M18 Fuel Pipe threader with autostop kickback control to provide the user with more safety threading capacity from 1/8 to 1.1/4 inch no load speed 0-35 rpm Compatible with new MILWAUKEE FPT114H die heads and Ridgid 11R heads (tool Only)
M18 Fuel Saber saw no load stroke rate 0-3000 spm stroke length 32 mm with FIXTEC blade clamp provides fast and easy blade changes (tool Only)
M18 Fuel Straight die grinder brushless motor adjustable 5 speed settings 8000/11000/14000/17000/20000 rpm collet sizes 6.35 mm (1/4 inch) with RAPIDSTOP break stops in less than 2 seconds (Tool Only)
M18 Fuel Angle grinder 5 inch paddle switch brushless motor adjustable 5 speed settings 3500-8500 rpm with RAPIDSTOP brake for added safety (Tool Only)
M18 Fuel Angle grinder 5 inch brushless motor adjustable 5 speed settings 3500-8500 rpm with RAPIDSTOP brake for added safety (Tool Only)
M18 Fuel Angle grinder 4 inch paddle switch brushless motor adjustable 5 speed settings 3500-8500 rpm with RAPIDSTOP brake for added safety (Tool Only)
M18 Fuel Angle grinder 4 inch brushless motor adjustable 5 speed settings 3500-8500 rpm with RAPIDSTOP brake for added safety (Tool Only)
M18 Fuel Angle grinder 4 inch brushless motor spins up to 8500 rpm with RAPIDSTOP brake for added safety (Tool Only)
M18 Fuel Needle concrete vibrator with a variable speed trigger brushless motor generates 1.8 Peak HP and 12500 CPM shaft length 1.2 m (Tool Only)
M18 Fuel SDS Plus rotary hammer with 3-mode operation rotary hammer/hammer/rotation no load speed 800 rpm max drilling concrete 32 mm (Tool Only)
M18 Fuel SDS Plus rotary hammer with 3-mode operation rotary hammer/hammer/rotation no load speed 1330 rpm max drilling concrete 26 mm (Tool Only)
M18 Fuel ONE-KEY High torque D-handle impact wrench extended anvil with 4-Mode speed 600/ 700/ 900/ 1200 rpm max torque 2711 Nm drive square 1 inch (Tool Only)
M18 Fuel ONE-KEY High torque D-handle impact wrench short anvil with 4-Mode speed 600/ 700/ 900/ 1200 rpm max torque 2711 Nm drive square 1 inch (Tool Only)
M18 Fuel Compact impact wrench with auto shut-off mode and speed settings 0-800/1650/2400/1000 rpm at impact rate 0-1000/2400/3500 ipm fastening torque 339 Nm drive square size 3/8 inch (Tool Only)
M18 Fuel Compact impact wrench with auto shut-off mode and 4ขspeed settings 0-900/1650/2400/1200 rpm at impact rate 0-1000/2400/3500 ipm fastening torque 339 Nm drive square size 1/2 inch (Tool Only)
M18 Fuel Compact impact wrench with auto shut-off mode and 4-speed settings 0-900/1650/2400/1200 rpm at impact rate 0-1000/2400/3500 ipm fastening torque 339 Nm drive square size 1/2 inch
M18 Fuel Hexagon impact driver with brushless motor max torque 226 Nm 4-Mode drive control 0-1700/3000/3900/3300 rpm chuck size hexagon 1/4 inch (Tool Only)
M18 Fuel Hammer Drill/Driver brushless motor max torque 158 Nm speed 500/2100 rpm with 0-33000 bpm with metal quick changes chuck size 13 mm (Tool Only)
M12 REDLITHIUM-ION high output battery 5.0 AH with overload protection and discharge protection
M12 Fuel Mounting fan compact 3 speed setting with 360 degree head rotation blade diameter 152.4 mm (6 inch) Up to 16 hours runtime (Tool Only)
M12 Fuel Compact blower with axial fan design provides higher performance 2-speed electronic switch air flow speed 180 km/h air volume 4955 l/min (Tool Only)
M12 Fuel Nibbler with 5-step cutting speed 1400-2200 strokes per minute ability to cut up to 35.5 mm/second cutting capacity in Mild steel/Stainless steel/Aluminium 1.6/1.2/2.1 mm (Tool Only)
M12 Fuel Hedge trimmer with blade length 200 mm no load speed 2700 m/min tooth spacing 14 mm cutting capacity 12.5 mm included protective blade cover (Tool Only)
M12 Handheld chemical sprayer with dual diaphragm pump pressure 20-80 psi flow rate 0.38-1.14 L/min tank capacity 7 liters spray distance up to 5 m (Tool Only)
Professional Cordless Power Tools, High-Output Lithium-Ion Systems & Portable Industrial Machinery
Eliminate restrictive cord tangles, safely execute structural fastening across remote jobsites, and maintain absolute mobility on heavy maintenance plant floors without sacrificing industrial torque output using ConnexTool’s commercial category directory of premium cordless power tools. We maintain a verified mobile equipment inventory of 185 live professional battery-powered fastening instruments, carrying high-torque brushless impact wrenches, sub-compact mechanical fuel ratchets, 4-mode SDS-Plus rotary drills, heavy-duty 158 Nm drill drivers, 14-inch abrasive metal cutoff saws with electronic emergency braking, variable-speed jigsaws and reciprocating saws, digital-temperature cordless heat guns, automated anti-drip caulk dispensers, high-definition LED site lighting towers, and intelligent multi-bay rapid chargers scaling from 4V USB-rechargeable micro inspect cells up to massive 12.0 Ah 18V high-output lithium energy matrices delivering up to 2034 Nm of breakaway force. Sourced directly from elite global engineering leaders—including Milwaukee—these premium cordless components are engineered with advanced brushless motor technologies, smart overload communication electronics, and heavy weather-sealed outer structures to guarantee extreme factory durability.
Intelligent Thermal Overload Sensors, 6000-Lumen High-Definition LED Arrays & Rapidstop Safety Controls
The heavy cordless impact guns, multi-directional telescopic site towers, and integrated HEPA dust-containment vacuum extractors in our premium battery-operated index utilize advanced solid-state safety systems built for harsh environments. Engineered to protect assembly technicians during relentless manufacturing cycles, these battery-driven tools offer professional industrial safety features—such as integrated torque-sensing auto-shut off modules to prevent thread stripping, heavy IP56/IP54 weather-sealed motor casings, and advanced magnetic base tracks that anchor tools firmly to iron framework. Key engineering upgrades—including smart electronic monitoring loops that prevent destructive cell over-discharge, rapid-braking mechanics that halt thick 355mm abrasive blades within 3 seconds, and specialized 98+ CRI LED bulbs that display perfect true color matching in dark automotive bays without color distortion, ensure uniform diagnostic tracking across heavy project sites.
A Certified Master Matrix of Premium Cordless Impact, Cutting & Specialized Maintenance Systems
Our verified mobile technical maintenance index completely satisfies all remote infrastructure overhauls, high-speed automotive workshop repairs, and commercial automated line processing parameters:
- ✔ High-Torque Cordless Impact Wrenches & Ratchets: Heavy brushless 1/2" and 3/4" square-drive impact guns yielding up to 2034 Nm of torque alongside compact 450 RPM sub-assembly ratchets.
- ✔ Cordless Material-Removal Saws & Rotary Hammers: High-efficiency 4-mode 26mm SDS-Plus concrete drills, 355mm metal chop saws with toolless blade guards, and 3000 SPM quick-change reciprocating saws.
- ✔ High-Definition LED Tower Lights & Inspection Bars: Multi-directional 1400 to 6000 lumen work lights with IP54 protective shielding, 98+ CRI color-matching indicators, and magnetic under-chassis arrays.
- ✔ High-Output Lithium Cell Matrices & Rapid Chargers: Severe-duty 3.0 Ah to 12.0 Ah lithium-ion battery blocks equipped with on-board fuel gauges paired with multi-slot rapid-rate sequential chargers.
Invest in premium professional cordless power tools, high-torque battery impact guns, and advanced brushless material-removal systems at ConnexTool, featuring 100% authentic inventory sourced directly from authorized tool repositories.
