Dies grinder, 90 degree angled for grinding, polishing, burnishing and deburring in areas that are difficult to access with collet chuck 6 mm stepless speed regulation via setting wheel 2000 - 22000 rpm overall length 155 mm
Pneumatic die grinder 420 W with collet capacity 1/4 inch max speed 22000 rpm in plastic case
Pneumatic impact wrench 1 inch with twin hammer max torque 1760 Nm
Pneumatic angle grinder 5 inch max speed 12000 rpm with spindle threaad M14x2
Compact caulk gun with 310 ml cartridge holder 12 Volts, up to 1780 N of force with Anti-drip feature prevents unwanted dripping when trigger is released and dial control with 6 speed settings (Tool only)
M18 Fuel Compact blower 3-speed electronic switch and variable speed trigger fan speed 0-18700 rpm air volume 0-2.9 m3/min with nozzle made from soft plastic to resist crushing or cracking (Tool Only)
M18 Fuel Floodlight trueview high definition lighting max 1500 lumens compact roll cage design built-in handle ability to hang vertically or horizontally run time up to 10 hours (Tool Only)
M18 Redlithium-Ion high output 3.0 Ah battery provides up to 50% more power with on-board battery Fuel gauge Redlink intelligenceand over load protection
Straight die grinder, lightweight, handy for grinding, polishing, burnishing and deburring with collet chuck 6 mm stepless speed regulation via setting wheel 2000 - 22000 rpm overall length 157 mm
M12 Fuel Floodlight trueview high definition lighting max 1000 lumens IP54 withstand drops up to 2.7 m integrated magnets, clamping mechanism, and key hole (Tool Only)
M12 Fuel High speed ratchet brushless motor speed 450 rpm max torque up to 47 Nm length 272 mm drive square 3/8 inch (Tool Only)
Pneumatic reversible screwdriver max torque 7.3 Nm with hexagon 1/4 inch drive
Air blow gun aluminium housing, anti-slip handle with pressure regulator for fast removal of chips or other foreign objects on machinery, in workshops, for wood work, hobby workshops
Mini air grinder 90 degree angled, lightweight for grinding, polishing, burnishing and deburring in tight areas with collet chuck 6 mm speed 18000 rpm overall length 126 mm
M18 Fuel Tower light trueview high definition lighting max 2000 lumens can be rotated 230 degree vertically and pivoted 240 degree horizontally IP54 height adjustable from 1.1-2.2 m (Tool Only)
M18 Fuel D-handle jigsaw brushless motor angle adjustable between 0/15/30/45 degree stroke length 25 mm stroke rate 0-3500 spm with fixtec blade clamp for fast and easy blade change (Tool Only)
M18 Fuel Abrasive chop saw brushless motor 355 mm (14 inch) arbor size 25 mm speed 4000 rpm with Rapidstop blade brake stops within 3 seconds of trigger release (Tool Only)
M12 Fuel Cordless multi-tool with variable speed 5000-20000 opm and overload protection length 260 mm (Tool Only)
Straight die grinder, extremely powerful lightweight for grinding, polishing, burnishing and deburring with collet chuck 6 mm speed 22000 rpm overall length 200 mm
Mini pneumatic reversible ratchet screwdriver 3/8 inch square drive with reduced vibration for effortless work for work in restricted access max tightening torque 54 Nm overall length 150 mm
Air hose reel with 145 degree swivel steel bracket made of durable polypropylene housing resistant to corrosion PU hose easy cleaning and longer life diameter 10 mm length 20 m
Chopsaw 2300 watt wheel diameter 355 mm bore size 25.4 mm speed 3800 rpm with quick release vice adjustment for fast angle adjustment from -45 to +45 degree cable length 4 m
M18 Fuel Bucket light dual light head with 180 degree of vertical and horizontal head rotation 3 output modes spot, flood, spot/flood provides up to 2500 lumens and up to 457 m of beam distance IP56 (Tool Only)
M12 Fuel Stick light trueview high definition lighting max 220 lumens adjustable metal hook allows for light to be hung in multiple orientations when being used IP20 (Tool Only)
M12-M18 Rapid charge station ability to charge 6 battery simultaneously while charging each pack faster with 3 for M12 and 3 for M18 battery
M12-M18 Rapid charger recharges in sequence first in first to charge whice charges each battery 40% faster
M12-M18 Charger recharges in sequence first in first to charge charging time 1.5 / 2.0 / 3.0 / 4.0 Ah in 30 / 40 / 60 / 80 minute or less
M18 Redlithium-Ion high output 12.0 Ah battery provides up to 50% more power with on-board battery Fuel gauge Redlink intelligenceand over load protection
M18 Redlithium-Ion 5.0 Ah battery with on-board battery Fuel gauge Redlink intelligenceand over load protection
M18 Fuel Compact heat gun high performance heating coil reach operational to reach temperature 470 degree in 7 seconds with overload protection (Tool Only)
M18 Fuel High torque impact wrench with friction ring brushless motor max torque 2034 Nm no load speed 0-800/1300/1800/1800 rpm drive square 3/4 inch
M18 Fuel High torque impact wrench with friction ring brushless motor max torque 1897 Nm speed 0-550/1400/1750/1750-750 rpm includes auto shut-off mode prevents over-tightening drive square 1/2 inch
M12 Redlithium-Ion battery 2.0 Ah with overload protection discharge protection prevents cell damage from over-discharge prevents user from damaging their cordless power tool
M12 Fuel Compact rotary tool with variable-speed no load speed 5000-3700 rpm collet capacity 0.8/1.6/2.4/3.2 mm compact and lightweight design (Tool Only)
M12 Fuel Stubby impact wrench brushless motor with auto-shut off mode reduces over fastening 4-mode drive control torque 85/125/339/14 Nm drive square 1/2 inch (Tool Only)
Pneumatic compact impact wrench 1/2 inch with single hammer max torque 610 Nm
Pneumatic impact ratchet max torque 70 Nm speed 150 rpm size 1/2 inch
Pneumatic long die grinder 250 W with collet capacity 1/4 inch max speed 27000 rpm
Pneumatic die grinder 250 W with collet capacity 1/4 inch max speed 28000 rpm
Balancer with stainless steel cable stroke length 1600 mm size 1.0-2.0 Kg
Switchable Air blow and suction gun, for sucking up dirt into the collection bag or for blowing surfaces clean housing made of metal with deflector special bag insert protects the bag against damage
Set of pneumatic chisel hammer strike rate adjustable in 9 levels up to 2600 strikes per minute, chisel collet size 10 mm hexagon shank including spare chisel 5 pieces in plastic case
Orbital sander 12000 rpm with dust extraction suction hose 2 m and collection bag, low height and light composite housing for sand disc with 15 bore holes diameter 150 mm
Air grinder for processing of workpieces in areas with very restricted access with wheel holder diameter 10 mm stepless speed regulation via setting wheel 2000 - 18000 rpm including cut-off wheel size 76 x 2.1 x 10 mm
Micro air grinder, for precise work in areas with restricted access, with collet chuck 6 mm with 3 mm reducing adapter speed 30000 rpm with hose length 1500 mm
Heavy-duty pneumatic drilling machine suitable for continuous operation in workshop and industry overall length 219 mm max 800 rpm with Quick-clamping drill chuck size 1 - 13 mm
High performance pneumatic reversible ratchet screwdriver 1/2 inch square drive long service life and high power for continuous operation in industrial production processes max tightening torque 95 Nm overall length 354.3 mm
Pneumatic reversible ratchet screwdriver 1/4 inch square drive with reduced vibration for effortless work for work in restricted access max tightening torque 35 Nm overall length 179 mm
Professional Industrial Power Tools, High-Torque Pneumatic Machinery & Cordless Workshop Systems
Maximize commercial workshop output, safely manage heavy industrial fastener tear downs, and automate continuous manufacturing lines using ConnexTool’s master commercial repository of premium labor-saving power tools. We maintain a verified heavy-duty machinery inventory of 379 live professional industrial-grade power instruments, carrying brushless cordless impact wrenches, twin-hammer pneumatic spanners, high-speed micro air die grinders, multi-speed orbital composite sanders, quick-clamping air drills, automated caulk guns, abrasive chop saws, and auto-retractable polyurethane air hose reels scaling from compact 1/4-inch hex air screwdrivers and 6 mm micro collets up to massive 1-inch heavy-truck impact blocks delivering 2034 Nm of torque. Sourced directly from elite global engineering leaders—including Milwaukee, Chicago Pneumatic, Hazet, TONE, and Bahco—these high-performance power tools are built with smart brushless motors, overload protection electronics, and vibration-dampened housings to guarantee extreme factory durability.
Smart Overload Electronic Guards, Twin-Hammer Rotors & Trueview High-Definition Arrays
The cordless fuel ratchets, high-speed pneumatic cut-off grinders, and adjustable multi-angle tower site lights in our comprehensive labor-saving catalog utilize advanced mechanical safety enhancements built for unforgiving settings. Engineered to protect operators under heavy duty cycles, our wind-driven and battery tools offer professional industrial safety enhancements—such as built-in automatic torque shut-off sensors to prevent over-tightening, IP56 liquid-tight electrical enclosures, and advanced internal brake systems that halt large abrasive wheels in under 3 seconds. Critical engineering upgrades—including twin-hammer impact mechanisms for balanced high-torque delivery, smart battery electronics that stop thermal overload damage, and multi-speed dials climbing up to 30,000 RPM, ensure smooth field execution across continuous manufacturing operations.
A Certified Master Matrix of Premium Pneumatic, Cordless & Industrial Power Systems
Our verified technical power tool index completely satisfies all high-volume automotive fleet repairs, heavy structural assembly plants, and automated assembly line processing parameters:
- ✔ High-Torque Cordless & Pneumatic Impact Wrenches: Premium 1/2", 3/4", and 1" drive fastening units built with advanced metal matrices and smart automatic shut-off systems.
- ✔ Industrial Micro Die Grinders & Air Sanders: High-velocity 90-degree and straight-neck air tools featuring 6mm collets, multi-speed dials, and integrated dust collection systems.
- ✔ Heavy Duty Air Drills & Reversible Screw Drivers: Quick-clamping 1-13mm air drills and 1/4" hex air screwdrivers designed with internal vibration-reduction systems for smooth assembly.
- ✔ Automated Caulk Guns, Metal Saws & Overhead Hose Reels: High-output 12V/18V dispensers, 355mm abrasive cutoff saws, and wall-mounted automatic spring-rewind air utility systems.
Invest in premium professional power tools, high-torque pneumatic impact tools, and advanced brushless cordless systems at ConnexTool, featuring 100% authentic inventory sourced directly from authorized tool repositories.
