Single-pole phase tester 150-250 Volt Kraftform handle with anti-roll feature against rolling away and sturdy clip blade length 70 mm tips size 0.5 x 3.0 mm
Voltage tester screwdriver 220–250 VAC. For Single-pole phase testing. Blade made of hard special spring steel alloy, long-lasting and durable, even when used as a screwdriver, blade length 60 mm, Tips size 0.5 x 2.5 mm.
Voltage tester screwdriver 100–250 VAC with LED indicator 100 times higher than with glow lamps visually recognizable display, even in brightly lit environments. durable and long-lasting in use, blade length 75 mm, Tips size 0.6 x 3.5 mm.
Voltage tester screwdriver 100–250 VAC with LED indicator 100 times higher than with glow lamps visually recognizable display, even in brightly lit environments. hard-wearing cast-on clip, blade length 60 mm, Tips size 0.4 x 2.5 mm.
Voltage tester features protective insulation for testing 220–250 V systems and comes with a convenient pocket clip. It has an overall length of 150 mm and a 70 mm blade, and is built for safe electrical operation.
Measuring tape with angle meter that allows to read the angle of inclination, case made of ABS resin 19 mm wide tape length 5.5 m with 0-point correction moving claw
Measuring tape automatic stop type by pulls out the tape by pressing the button and stops when released, case made of ABS resin 13 mm wide tape length 5.5 m with 0-point correction moving claw
Measuring tape automatic stop type by pulls out the tape by pressing the button and stops when released, case made of ABS resin 13 mm wide tape length 3.5 m with 0-point correction moving claw
Measuring tape automatic stop type by pulls out the tape by pressing the button and stops when released, case made of ABS resin 13 mm wide tape length 2.0 m with 0-point correction moving claw
Measuring tape, locking type, case made of ABS resin covered with elastic resin to prevent damage when dropped 25 mm wide tape length 5.5 m double-sided scale with strong magnets on the body and claws
Measuring tape, locking type, case made of ABS resin covered with elastic resin to prevent damage when dropped 25 mm wide tape length 5.5 m double-sided scale with strong magnets attached to the claws
Measuring tape, locking type, case made of ABS resin covered with elastic resin to prevent damage when dropped 25 mm wide tape length 10.0 m with 0-point correction moving claw
Measuring tape, locking type, case made of ABS resin covered with elastic resin to prevent damage when dropped 25 mm wide tape length 5.5 m with 0-point correction moving claw
Measuring tape, locking type, case made of ABS resin covered with elastic resin to prevent damage when dropped 13 mm wide tape length 2.0 m with 0-point correction moving claw
Measuring tape, locking type integrated with a belt holder to prevent falling and easily attached and detached with one hand, 25 mm wide tape length 5.5 m with 0-point correction moving claw
Measuring tape, convenient lock function that can secure the tape with shock absorber, case made of ABS resin 19 mm wide tape length 5.5 m with 0-point correction moving claw
Measuring tape, standard type for speedy measurement with shock absorber, case made of ABS resin 16 mm wide tape length 3.5 m with 0-point correction moving claw
Measuring tape with double locking mechanism that auto-stop button that stops firmly, 25 mm wide strong tape with 1.5 times the rigidity of regular tape length 5.5 m integrated with strong magnets attached to the claws
Voltage and continuity tester eMobility 4-digit LC display suited for testing hybrid and electric vehicles as well as photovoltaic systems range 12-1000V AC and 12-1500V DC IP64
Single-pole non-contact voltage detector for detect and locate live electrical cabling and wires detected range 90-1000V AC suitable for all socket variants worldwide IP67
Single-pole non-contact voltage detector for detection and localization of live conductors detected range 12-1000V AC approved according to the ATEX standard for use in explosive areas (category II)
Single-pole non-contact voltage detector for detect and locate live electrical cabling and wires detected range 12-1000V AC suitable for all socket variants worldwide IP67
Voltage tester for industry professionals, blade made of chrome-vanadium-molybdenum steel length 60 mm For determining alternating voltages in low voltage range 110-250 volts in retail packaging
Voltage tester for industry professionals, blade made of chrome-vanadium-molybdenum steel length 60 mm For determining alternating voltages in low voltage range 110-250 volts
Voltage tester with push-on clip black version, blade made of chrome-vanadium through-hardened length 60 mm For determining alternating voltages in low voltage range 150-250 volts in retail packaging
Voltage tester with push-on clip black version, blade made of chrome-vanadium through-hardened length 60 mm For determining alternating voltages in low voltage range 150-250 volts
Voltage tester with push-on clip, blade made of chrome-vanadium through-hardened length 60 mm For determining alternating voltages in low voltage range 120-250 volts in retail packaging
Voltage tester with push-on clip, blade made of chrome-vanadium through-hardened length 60 mm For determining alternating voltages in low voltage range 120-250 volts
Vernier callipers caliMax made of Non-metallic high-tech material with 50 percent fibre-glass content reading 0.1 mm (1/64 inch) with millimetre and inch display length 150 mm (6 inch)
Spirit level for electrician for measuring and marking vertical and horizontal distances between flush boxes with cleverly positioned linear scales viewing from above length 400 mm
Feeler gauge blade length 106 mm with slim taper blade made of Brass non-magnetic 20 pieces size 0.05-1.0 mm increasing by 0.05 mm
Feeler gauge blade length 84 mm with radius on the blade tip 15 mm made of stainless steel 20 pieces size 0.05-1.0 mm increasing by 0.05 mm
Automotive circuit tester for checking the lighting and ignition systems of motor vehicles 6-12 and 24 Volts cable with crocodile clip
Thread pitch gauge for for various applications Metric and Whitworth threads 52 pieces size 0.25-6 mm and 4-62 teeth per inch
Precision feeler gauges with conical blades length 100 mm 26 pieces thickness 0.03-1.00 mm (size 0.10-1.00 graduated in 0.05 mm increments)
Precision feeler gauges with conical blades length 100 mm 20 pieces thickness 0.05-1.00 mm (graduated in 0.05 mm increments)
Precision feeler gauges with conical blades length 100 mm 13 pieces thickness 0.05-1.00 mm (size 0.05-0.30 graduated in 0.05 mm increments)
Voltage tester according to EN standard tested in accordance with the current VDE-GS standard plastic handle and clip for AC 100-250 V overall length 190 mm tip width 3.5 mm
Voltage testing screwdriver plastic-coated blade made from chrome-vanadium steel length 145 mm tip size 3.0 x 0.8 mm for single-pole phase tester up to 250 VAC
Voltage tester with clip for single-pole phase tester 220 - 250 Volts round blade length 65 mm protective insulation up to 1000 V tips size 0.5 x 2.8 mm
Voltage tester, blade made of High-performance alloy steel chrome plated blade length 42 mm with plastic protection up to the tip for detecting voltage within the range of 150-250V
Professional Industrial Measuring Tools, Metrology Instruments & Electrical Diagnostic Equipment
Calibrate high-voltage hybrid vehicle powertrains, verify micro-machined industrial threading tolerances, and ensure flawless spatial layouts across modern worksites using ConnexTool’s master commercial directory of premium measuring tools. We maintain a verified technical metrology inventory of 42 live professional diagnostic instruments, carrying heavy-duty non-contact voltage detectors, railed dual-voltage eMobility circuit analyzers, high-clearance magnetic measuring tapes, non-metallic digital vernier calipers, tapered metric feeler gauges, and specialized thread pitch indicators scaling from fine 0.03 mm clearance leaves up to 10.0-meter industrial tape measures and 1500V DC power arrays. Sourced directly from elite global engineering leaders—including Wiha, Tajima, PB Swiss Tools, Hazet, Stahlwille, Wera, Atorn, and Bahco—these high-performance diagnostic devices are built with shockproof ABS resin armors, ATEX explosive-zone certifications, and premium non-magnetic alloy matrices to deliver extreme laboratory accuracy and superior field reliability.
100x Brightness LED Indicators, ATEX Zone Safety Ratings & Non-Magnetic Brass Matrices
The dual-scale digital calipers, VDE-insulated phase-testing screwdrivers, and auto-correcting 0-point distance indicators in our comprehensive metrology group utilize advanced chemical and structural designs engineered for dangerous environments. Built to protect technicians, our high-voltage electronic testers offer advanced industrial safety certifications—such as IP67 liquid-tight enclosures, IP64 weather shielding, and category II ATEX explosion proofing—to guarantee stable operation near hazardous vapors or heavy rainfall. Critical electrical and mechanical updates—including high-visibility LED lights that shine 100 times brighter than standard neon lamps in sunlit bays, premium non-magnetic brass leaf clusters to measure gaps near active transformers safely, and heavy elastic outer rubber jackets to survive brutal drop impacts onto concrete workshop floors—ensure uniform diagnostic tracking under harsh project conditions.
A Certified Master Matrix of Premium Calibration, Metrology & Electrical Testing Systems
Our verified technical measuring tool index completely satisfies all automotive hybrid drive diagnostic parameters, building structural layouts, and precision industrial machining calibration tolerances:
- ✔ High-Voltage & Non-Contact Testers: Premium insulated diagnostic devices and single-pole indicators engineered to measure up to 1000V AC and 1500V DC safely across hybrid vehicles.
- ✔ Shock-Protected Distance Tape Measures: Heavy-duty ABS distance tapes featuring double magnetic claws, 0-point sliding hooks, and dual-sided scales ranging from 2.0m to 10.0m.
- ✔ Fiberglass Calipers & Structural Levels: High-tech non-metallic vernier calipers built with 50% fiberglass content alongside dedicated top-view linear scales for perfect horizontal layouts.
- ✔ Tapered Feeler & Thread Pitch Gauges: Specialized non-magnetic brass or hardened stainless multi-leaf arrays designed to verify tight engine gaps and metric/Whitworth industrial thread pitches.
Invest in premium professional measuring tools, high-voltage automotive diagnostic sensors, and heavy-duty mechanical metrology gauges at ConnexTool, featuring 100% authentic inventory sourced directly from authorized tool repositories.
