SIMPLEX soft-face mallet White superplastic inserts medium hard, very durable with cast iron housing and wooden handle length 370 mm head diameter 50 mm
SIMPLEX Red plastic inserts hard, oil and grease resistant hardness of approximate 70 Shore D for soft-face mallets head diameter size 30 mm
SIMPLEX soft-face mallet Black rubber composition inserts medium hard, impact cushioning with cast iron housing and wooden handle length 325 mm head diameter 40 mm
SIMPLEX Silver soft metal inserts hard, heat-resistant replaced a classic lead hammer for soft-face mallets head diameter size 30 mm
SIMPLEX Black rubber composition inserts medium hard, impact cushioning, low-wear hardness of approximate 95 Shore A for soft-face mallets head diameter size 50 mm
Spare super plastic (UHMW) replacement face 70 mm diameter for Thor super plastic and split head hammer Size 5; high impact strength, abrasive resistant, no metal inserts, hand-replaceable.
Spare super plastic (UHMW) replacement face 50 mm diameter for Thor super plastic and split head hammer Size 4; high impact strength, abrasive resistant, no metal inserts, hand-replaceable.
Spare super plastic (UHMW) replacement face 44 mm diameter for Thor super plastic and split head hammer Size 3; high impact strength, abrasive resistant, no metal inserts, hand-replaceable.
Spare super plastic (UHMW) replacement face 38 mm diameter for Thor super plastic and split head hammer Size 2; high impact strength, abrasive resistant, no metal inserts, hand-replaceable.
Spare super plastic (UHMW) replacement face 32 mm diameter for Thor super plastic and split head hammer Size 1; high impact strength, abrasive resistant, no metal inserts, hand-replaceable.
Spare super plastic (UHMW) replacement face 25 mm diameter for Thor super plastic and split head hammer Size A; high impact strength, abrasive resistant, no metal inserts, hand-replaceable.
Spare soft grey PVC replacement face (Shore A63-73) 50 mm diameter for Thor Thorex and Thorace hammers; will not mark finished surfaces, suited for precision assembly on delicate components.
Spare soft grey PVC replacement face (Shore A63-73) 44 mm diameter for Thor Thorex and Thorace hammers; will not mark finished surfaces, suited for precision assembly on delicate components.
Spare soft grey PVC replacement face (Shore A63-73) 38 mm diameter for Thor Thorex and Thorace hammers; will not mark finished surfaces, suited for precision assembly on delicate components.
Spare soft grey PVC replacement face (Shore A63-73) 32 mm diameter for Thor Thorex and Thorace hammers; will not mark finished surfaces, suited for precision assembly on delicate components.
Spare soft grey PVC replacement face (Shore A63-73) 25 mm diameter for Thor Thorex and Thorace hammers; will not mark finished surfaces, suited for precision assembly on delicate components.
Spare tough brown polyurethane replacement face (Shore D58-62) 63 mm diameter for Thor Thorex and Thorace hammers; abrasion-resistant and suited for striking sharp surfaces, cutting forms, and steel rule die assembly.
Spare tough brown polyurethane replacement face (Shore D58-62) 50 mm diameter for Thor Thorex and Thorace hammers; abrasion-resistant and suited for striking sharp surfaces, cutting forms, and steel rule die assembly.
Spare tough brown polyurethane replacement face (Shore D58-62) 44 mm diameter for Thor Thorex and Thorace hammers; abrasion-resistant and suited for striking sharp surfaces, cutting forms, and steel rule die assembly.
Spare tough brown polyurethane replacement face (Shore D58-62) 38 mm diameter for Thor Thorex and Thorace hammers; abrasion-resistant and suited for striking sharp surfaces, cutting forms, and steel rule die assembly.
Spare tough brown polyurethane replacement face (Shore D58-62) 32 mm diameter for Thor Thorex and Thorace hammers; abrasion-resistant and suited for striking sharp surfaces, cutting forms, and steel rule die assembly.
Spare medium hard red plastic replacement face (Shore D45-55) 50 mm diameter for Thor Thorex and Thorace hammers; suited for light hammering and precision part assembly, one-piece moulding, hand-replaceable.
Spare medium hard red plastic replacement face (Shore D45-55) 44 mm diameter for Thor Thorex and Thorace hammers; suited for light hammering and precision part assembly, one-piece moulding, hand-replaceable.
Spare medium hard red plastic replacement face (Shore D45-55) 38 mm diameter for Thor Thorex and Thorace hammers; suited for light hammering and precision part assembly, one-piece moulding, hand-replaceable.
Spare medium hard red plastic replacement face (Shore D45-55) 32 mm diameter for Thor Thorex and Thorace hammers; suited for light hammering and precision part assembly, one-piece moulding, hand-replaceable.
Spare medium hard red plastic replacement face (Shore D45-55) 25 mm diameter for Thor Thorex and Thorace hammers; suited for light hammering and precision part assembly, one-piece moulding, hand-replaceable.
Spare hard white nylon replacement face (Shore D57-61) 63 mm diameter for Thor Thorex and Thorace hammers; all-purpose one-piece moulding, hand-replaceable without tools, no metal pegs or inserts.
Spare hard white nylon replacement face (Shore D57-61) 50 mm diameter for Thor Thorex and Thorace hammers; all-purpose one-piece moulding, hand-replaceable without tools, no metal pegs or inserts.
Spare hard white nylon replacement face (Shore D57-61) 44 mm diameter for Thor Thorex and Thorace hammers; all-purpose one-piece moulding, hand-replaceable without tools, no metal pegs or inserts.
Spare hard white nylon replacement face (Shore D57-61) 38 mm diameter for Thor Thorex and Thorace hammers; all-purpose one-piece moulding, hand-replaceable without tools, no metal pegs or inserts.
Spare hard white nylon replacement face (Shore D57-61) 32 mm diameter for Thor Thorex and Thorace hammers; all-purpose one-piece moulding, hand-replaceable without tools, no metal pegs or inserts.
Spare hard white nylon replacement face (Shore D57-61) 25 mm diameter for Thor Thorex and Thorace hammers; all-purpose one-piece moulding, hand-replaceable without tools, no metal pegs or inserts.
Spare extra hard yellow replacement face (Rockwell R103) 50 mm diameter for Thor Thorex and Thorace hammers; engineered for specialist high-hardness applications such as setting copper armatures.
Spare extra hard yellow replacement face (Rockwell R103) 44 mm diameter for Thor Thorex and Thorace hammers; engineered for specialist high-hardness applications such as setting copper armatures.
Spare extra hard yellow replacement face (Rockwell R103) 38 mm diameter for Thor Thorex and Thorace hammers; engineered for specialist high-hardness applications such as setting copper armatures.
Spare extra hard yellow replacement face (Rockwell R103) 32 mm diameter for Thor Thorex and Thorace hammers; engineered for specialist high-hardness applications such as setting copper armatures.
Spare medium hard red plastic replacement face (Shore D45-55) 50 mm diameter for Thor Thorex plastic hammers; suited for light hammering and precision part assembly.
Spare medium hard red plastic replacement face (Shore D45-55) 44 mm diameter for Thor Thorex plastic hammers; suited for light hammering and precision part assembly.
Spare medium hard red plastic replacement face (Shore D45-55) 38 mm diameter for Thor Thorex plastic hammers; suited for light hammering and precision part assembly.
Spare medium hard red plastic replacement face (Shore D45-55) 32 mm diameter for Thor Thorex plastic hammers; suited for light hammering and precision part assembly.
Spare medium hard red plastic replacement face (Shore D45-55) 25 mm diameter for Thor Thorex plastic hammers; suited for light hammering and precision part assembly.
Spare medium hard red plastic replacement face (Shore D45-55) 19 mm diameter for Thor Thorex plastic hammers; suited for light hammering and precision part assembly.
Spare extra hard yellow replacement face (Rockwell R103) 32 mm diameter can be instantly replaced BY HAND for Thor Thorex plastic hammers; engineered for specialist applications.
Spare extra hard yellow replacement face (Rockwell R103) 25 mm diameter can be instantly replaced BY HAND for Thor Thorex plastic hammers; engineered for specialist applications.
Spare pure electrolytic copper replacement face 70 mm diameter for Thor copper and copper/hide hammer Size 5; provides safe high-impact blow without sparking risk.
Spare pure electrolytic copper replacement face 50 mm diameter for Thor copper and copper/hide hammer Size 4; provides safe high-impact blow without sparking risk.
Spare pure electrolytic copper replacement face 44 mm diameter for Thor copper and copper/hide hammer Size 3; provides safe high-impact blow without sparking risk.
Spare pure electrolytic copper replacement face 38 mm diameter for Thor copper and copper/hide hammer Size 2; provides safe high-impact blow without sparking risk.
Premium Industrial Soft-Face Mallets & Customizable Striking Systems for Surface Protection
Achieve flawless component alignment and damage-free assembly execution with ConnexTool’s extensive inventory of professional industrial soft-face hammers and mallets. We distribute elite modular striking tools engineered by global manufacturing giants, including Halder, Thor, PB Swiss Tools, and Wiha. Built to deliver powerful, controlled impact forces without denting, scratching, or fracturing expensive finished workpieces, our soft-face inventory guarantees absolute material protection across precision mold-making, automotive body shops, and sheet metal fabrication lines.
Smart Split-Housing Engineering, Hardness-Graded Inserts & Variable Handle Adaptability
The premium soft-face mallets in our catalog utilize intelligent, heavy-duty split-housing mechanics (such as the world-renowned Halder SIMPLEX system). These robust cast-iron or aluminum configurations allow technicians to loosen a single central bolt to seamlessly replace worn handles or swap striking inserts on the fly. This flexible architecture supports diverse operational setups by pairing different material hardness profiles on opposite sides of the same hammer head, drastically cutting tool costs while maximizing versatile workspace utility.
A Complete Modular Inventory of Interchangeable Faces & Ergonomic Mallets
Our comprehensive technical tool catalog spans across all specialized hardness ratings and insert diameters:
- ✔ Rubber Composition & TPE Inserts: Medium-soft composite blocks (such as Halder black rubber) engineered to absorb high impact shocks without leaving unappealing dark streaks.
- ✔ Superplastic & Tough White Nylon Faces: High-density polyamides (such as Thor and SIMPLEX white nylon) delivering rigid, heavy driving force optimized for positioning unyielding steel details.
- ✔ Oil-Resistant PVC & Polyurethane Caps: Color-coded inserts (Shore D58-62) built to withstand oil contamination, grease, and sharp metal shard strikes during machine tooling.
- ✔ Varying Component Diameters: Precise replacement profiles running from compact 22 mm, 32 mm, up to heavy-duty 70 mm configurations to perfectly match your global workshop assets.
Invest in professional-grade striking systems at ConnexTool, featuring 100% authentic inventory sourced directly from authorized European tool repositories.
