Short, compact pneumatic impact wrench 1 inch square drive, long service life and high efficiency, with powerful twin hammer mechanism max loosening torque 4100 Nm
Short, compact pneumatic impact wrench 3/4 inch square drive, long service life and high efficiency, with powerful twin hammer mechanism max loosening torque 4100 Nm
Short, compact pneumatic impact wrench 1/2 inch square drive, long service life and high efficiency, with powerful twin hammer mechanism max loosening torque 2200 Nm
Short, compact, swivelable impact wrench 1/2 inch square drive enables working in hard-to-reach screw-joints with powerful twin hammer mechanism max loosening torque 550 Nm
M18 Fuel Stand light trueview high definition light output from 0-5400 lumens IP67 height adjustable from 0.5-1.65 m collapsible to only 55 cm for easy storage and transportation (Tool Only)
M18 Fuel Spot/Flood light output 2200/1000 lumens provides 360/90 degree equipped with a 10.8 cm self-centering metal hook (Tool Only)
M18 Fuel Area floodlight trueview high definition lighting with up to 1500 lumens and up to 20 hours of run time with two powerful magnets IP54 (Tool Only)
M18 Fuel Lantern light trueview high definition lighting 180-360 degree adjustable beam 4 light settings 700/350/70 lumens on high and strobe/ medium/low with usb charge port IP24 (Tool Only)
M18 Fuel Search light trueview high definition max 1250 lumens with up to 650 m beam distance 4 output modes spot, flood, spot/flood, strobe 1250/1200/600/1200 lumens IP54 (Tool Only)
M12 Fuel led Tower light max 1400 lumens head can be rotated 210 degree vertically and pivoted 270 degree horizontally height adjustable 90/127/173 cm folds and stores only 78 cm (Tool Only)
M12 Fuel Underhood light trueview high definition light 2-mode setting 1350 lumens/4 hours 600 lumens/8 hours IP54 mounting hooks extend 119-196 cm light bar rotatable vertically (Tool Only)
M12 Fuel Lantern light trueview high definition lighting 180-360 degree adjustable beam light output 400 lumens with 2.1a usb charger port IP24 two including stainless steel hooks (Tool Only)
M12 Fuel Pivot area light trueview high definition lighting max 700 lumens with powerful magnets 110 degree rotation withstand drops up to 3 m IP54 built-in 2.1 amp usb output for charging (Tool Only)
M12 Fuel Led spot light trueview high definition lighting beam distance 650 m intense and highly focused beam of light with 750 lumens up to 8 hours of run time battery IP24 (Tool Only)
M18 Fuel Hydraulic cable crimper max crimping force 53 KN with 350 degree rotatable head crimping range 16-185 sq.mm (Tool Only)
M18 Fuel ASCR cutter 860 sq.mm brushless motor cutting force 77.8 KN max cutting cable diameter 44 mm in less than 9 seconds with 340 degree rotatable head (Tool Only)
M18 Fuel Hydraulic cable cutting machine brushless motor wire cutter force up to 6 Tons cutting capacity in copper/aluminium 400/500 sq.mm average cut speed 3.3 seconds (Tool Only)
M18 Dual bay simultaneous rapid charger which charges 2 sets of battery the same time 3 times faster than standard charger
M12-M18 Super charger sequential charging automatically charges the second inserted battery once the first pack is fully charged charging 4 times faster than standard charger
M18 Redlithium-Ion high output 8.0 Ah battery provides up to 50% more power with on-board battery Fuel gauge Redlink intelligenceand over load protection
M18 Fuel Compact vacuum brushless motor 0.95 l canister capacity extendable hose up to 1.2 m quick-change accessories for upright use, at ground level, waist level, or overhead with highly efficient hepa filter (Tool Only)
M18 Fuel Compact vacuum with hepa filter for clearing small or large areas clear viewing window gives the user the ability to see debris build up (Tool Only)
M18 Fuel Wet/Dry vacuum maximum air flow of 1300 l/min at pressure 80 bar with hepa filter vacuum hose diameter 32 mm capacity liquids 7.5 l (Tool Only)
M18 Fuel Chainsaw brushless motor with 30 cm bar chainsaw chain speed 12.4 m/s variable speed trigger (Tool Only)
Switch chemical tank 15l hose length 1.75 m flow rate 0.4-2.0 l/min spray distance 7.6 m pressure 8/27 bar with stainless steel spray handle straight and angle nozzle
Switch tank 15l hose length 3 m replaceable hose with standard garden hose quick coupling flow rate 0.6-4.6 l/min spray distance 7.6 m pressure 4/14 bar
M18 Fuel backpack 15l sprayer power pack pump pressure 120 psi (8.27 bar) can be replace tank to eliminate cross-chemical contamination (Tool Only)
M18 Fuel Trimmer brushless motors blade length 610 mm cutting capacity 20 mm no load speed 3400 m/min tooth spacing 20 mm (Tool Only)
Quik-lok Extension attachment length 103 cm safer to use without the need for a ladder
Quik-lok Edger attachment standard 203 mm edger blade speed up to 3900 rpm length 124 cm get the perfect lawn, sidewalk and path edges creating a sharp and manicured look
Quik-lok Hedge trimmer attachment length 154 cm blade length 508 mm max cut capacity 25 mm adjustment collar allow for 270 degree blade set rotation delivering 13 opepositions
Quik-lok Chainsaw attachment length 124 cm chain bar 254 mm with automatic chain oiling no load speed 0-3700/4600 rpm
Quik-lok Grass trimmer attachment cutting adjustable 355-406 mm easy load trimmer head with bump feed holds 7.6 m of 2.0 mm or 6.1 m of 2.4 mm trimmer line
M18 Fuel Outdoor power head quik-lok system brushless motor 2-speed control 0-6860/6860 rpm with variable speed trigger full throttle in under 1 second (Tool Only)
M18 Fuel Blower, brushless motor fan speed 14000 rpm maximum air speed 193 km/h high/low speed setting air volume 8.75/12.7 m3/min full throttle in under 1 second (Tool Only)
M18 Fuel Fish tape with non-conductive cartridge length 30 m variable speed trigger compatible with 4 interchangable drums steel tape 36 and 72 m / non-conductive tape 30 and 60 m (Tool Only)
M18 Fuel Table saw brushless motor blade diameter 210 mm bore size 25.4 mm depth of cut 63 mm at 90 degrees speed 6300 rpm (Tool Only)
M18 Fuel Dual bevel sliding compound mitre saw brushless motor blade diameter 10 inch bore size 1 inch no load speed 4000 rpm (Tool Only)
M18 Fuel Cordless nailer for nail diameter 1.02 mm (18 GA) length 15-54 mm magazine capacity 110 nail with dry-fire lockout prevents the tool from firing when the magazine is empty (Tool Only)
M18 Fuel Planer with cut capacity width 82 mm max cutting depth 2mm depth adjustable from 0-2 mm (0.1 mm increments) chip ejection switch allows users to select left or right chip exhaust (Tool Only)
M18 Fuel Trim router brushless motor variable speed dial range between 10000-31000 rpm collet diameter 6.35 mm (1/4 inch) with fine adjustment screw allows for precise adjustments 1/64 inch increments (Tool Only)
M18 Fual Random orbital sander variable speed control 14000-24000 opm, and orbit diameter 2.4 mm speed 7000-12000 rpm sanding pad diameter 125 mm universal hose adapter included (Tool Only)
M18 Fuel Compact metal shear no load speed 2500 rpm max cutting capacity aluminium/steel at 3.3/2 mm minimun cutting radius 180 mm (Tool Only)
M18 Fuel Band saw brushless motor 5 step variable speed 0-116 m/min max cutting diameter 125 mm blade length 1140 mm with dual-trigger designed for two-handed operation (Tool Only)
Professional Industrial Power Tools, High-Torque Pneumatic Machinery & Cordless Workshop Systems
Maximize commercial workshop output, safely manage heavy industrial fastener tear downs, and automate continuous manufacturing lines using ConnexTool’s master commercial repository of premium labor-saving power tools. We maintain a verified heavy-duty machinery inventory of 379 live professional industrial-grade power instruments, carrying brushless cordless impact wrenches, twin-hammer pneumatic spanners, high-speed micro air die grinders, multi-speed orbital composite sanders, quick-clamping air drills, automated caulk guns, abrasive chop saws, and auto-retractable polyurethane air hose reels scaling from compact 1/4-inch hex air screwdrivers and 6 mm micro collets up to massive 1-inch heavy-truck impact blocks delivering 2034 Nm of torque. Sourced directly from elite global engineering leaders—including Milwaukee, Chicago Pneumatic, Hazet, TONE, and Bahco—these high-performance power tools are built with smart brushless motors, overload protection electronics, and vibration-dampened housings to guarantee extreme factory durability.
Smart Overload Electronic Guards, Twin-Hammer Rotors & Trueview High-Definition Arrays
The cordless fuel ratchets, high-speed pneumatic cut-off grinders, and adjustable multi-angle tower site lights in our comprehensive labor-saving catalog utilize advanced mechanical safety enhancements built for unforgiving settings. Engineered to protect operators under heavy duty cycles, our wind-driven and battery tools offer professional industrial safety enhancements—such as built-in automatic torque shut-off sensors to prevent over-tightening, IP56 liquid-tight electrical enclosures, and advanced internal brake systems that halt large abrasive wheels in under 3 seconds. Critical engineering upgrades—including twin-hammer impact mechanisms for balanced high-torque delivery, smart battery electronics that stop thermal overload damage, and multi-speed dials climbing up to 30,000 RPM, ensure smooth field execution across continuous manufacturing operations.
A Certified Master Matrix of Premium Pneumatic, Cordless & Industrial Power Systems
Our verified technical power tool index completely satisfies all high-volume automotive fleet repairs, heavy structural assembly plants, and automated assembly line processing parameters:
- ✔ High-Torque Cordless & Pneumatic Impact Wrenches: Premium 1/2", 3/4", and 1" drive fastening units built with advanced metal matrices and smart automatic shut-off systems.
- ✔ Industrial Micro Die Grinders & Air Sanders: High-velocity 90-degree and straight-neck air tools featuring 6mm collets, multi-speed dials, and integrated dust collection systems.
- ✔ Heavy Duty Air Drills & Reversible Screw Drivers: Quick-clamping 1-13mm air drills and 1/4" hex air screwdrivers designed with internal vibration-reduction systems for smooth assembly.
- ✔ Automated Caulk Guns, Metal Saws & Overhead Hose Reels: High-output 12V/18V dispensers, 355mm abrasive cutoff saws, and wall-mounted automatic spring-rewind air utility systems.
Invest in premium professional power tools, high-torque pneumatic impact tools, and advanced brushless cordless systems at ConnexTool, featuring 100% authentic inventory sourced directly from authorized tool repositories.
