Milwaukee M18 BTP-0
฿9,300.00
M18 Fuel Compact transfer pump flow rate of 30.3 l/min male thread reception 3/8 inch BSPT inlet hose with 19 mm inner diameter is recommended suction height 5.5 m and max head height up to 23 m (Tool Only)
In stock
Click to see DATASHEET| Weight | 3.4 kg |
|---|---|
| BRAND | MILWAUKEE |
| MPN | 016052011 |
| GTIN/EAN | 4058546293932 |
Related products
M12 Fuel Digital adjustable torque wrench range 16.9 - 203.4 Nm length 597 mm drive speed 0-100 rpm data storage capacity 28500 entries 1/2 inch square drive, Supplied with 12V / 2.0Ah Red Li-ion battery, C12C charger and sturdy plastic case
M18 Fuel Hexagon hydraulic driver brushless motor max torque 40 Nm 4-mode drive control speed 900/2100/3000/3000 rpm hydraulic powertrain delivering quieter operation hexagon drive 1/4 inch (Tool Only)
M12 Fuel Cross line laser with plumb points working range of 38 m and up to 100 m all-in-one functionality with horizontal levelling, vertical alignment and plumb point transfer from floor to ceiling IP54 (Tool Only)
M12 Fuel Cut-off tool with blade diameter 76 mm cutting depth capacity 16 mm spinning at 20000 rpm optimised for one-handed use (Tool Only)
M12 Fuel Wet/Dry vacuum 2 times quieter than traditional only 87 dB(a) air flow of 1275 l/min 105 mbar with highly efficient hepa filter (Tool Only)
M12 Fuel High speed ratchet brushless motor speed 450 rpm max torque up to 47 Nm length 272 mm drive square 1/4 inch (Tool Only)
M12 Fuel Stubby impact wrench brushless motor with auto-shut off mode reduces over fastening 4-mode drive control torque 85/125/339/14 Nm drive square 1/2 inch (Tool Only)
M12 Fuel Cordless multi-tool with variable speed 5000-20000 opm and overload protection length 260 mm (Tool Only)
M12 Fuel Pruning saw brushless motor variable speed trigger no load speed 5 m/s with quick adjustments to chain tension chain bar length 152 mm (Tool Only)
M12 Fuel Hammer drills SDS-Plus with 2-mode operation choose rotary hammer or rotation only max drilling up to 13 mm holes in poured concrete and masonry
M12 Fuel Installation drill driver removable chuck system with 4 different heads brushless motor no load speed 400/600 rpm delivers torque up to 34 Nm chuck size 10 mm (Tool Only)
M12 Fuel Hammer drills SDS-Plus with 2-mode operation choose rotary hammer or rotation only max drilling up to 13 mm holes in poured concrete and masonry (Tool Only)
