M12 Fuel Cross line laser with plumb points working range of 38 m and up to 100 m all-in-one functionality with horizontal levelling, vertical alignment and plumb point transfer from floor to ceiling IP54 (Tool Only)
M12 Fuel Wet/Dry vacuum 2 times quieter than traditional only 87 dB(a) air flow of 1275 l/min 105 mbar with highly efficient hepa filter (Tool Only)
M12 Fuel High performance compact jigsaw with variable speed 0-2800 rpm stroke length 19 mm maximum bevel capacity 45 degree (Tool Only)
M12 Fuel Cut-off tool with blade diameter 76 mm cutting depth capacity 16 mm spinning at 20000 rpm optimised for one-handed use (Tool Only)
M12 Fuel Spot polisher/detail sander with variable 2 speed 0-2800 / 0-8300 rpm for both polishing and sanding applications max capacity of 76 mm polishing sponge and 50 mm sanding pad (Tool Only)
M12 Fuel Compact inflator, pressure 0-120 psi hose length 660 mm illuminated digital gauge display with target and current pressure reading accuracy +-3% (Tool Only)
M12 Fuel Cordless grease gun 400 ml max pressure 8000 psi length 355 mm supplied with high pressure flex hose length 914 x 14.4 mm with spring guard and grease coupler (Tool Only)
M12 Rivet tool with pulling force 9 KN stroke length 20 mm suitable for all aluminium, steel, stainless steel and copper rivets 2.4 / 3.2 / 4.0 / 4.8 mm (Tool Only)
M12 Fuel Pruning saw brushless motor variable speed trigger no load speed 5 m/s with quick adjustments to chain tension chain bar length 152 mm (Tool Only)
M12 Fuel Compact hackzall brushless motor stoke length 15.9 mm stoke rate 0-3000 spm design for one-handed used (Tool Only)
M12 Fuel Multi tool brushless motor adjustable 10000 to 20000 opm with left/right oscillation angle 1.95 degree allowing faster cuts (Tool Only)
M12 Fuel Right angle drill/driver variable speed paddle switch trigger 0-800 rpm chuck capacity 10 mm max torque 12 Nm (Tool Only)
M12 Fuel Right angle die grinder 0.3 Hp with 4-mode speed control 0-10000/15000/20000/24500 rpm (Tool Only)
M12 Fuel Straight die grinder 0.3 hp with 3-mode speed control 0-10000/15000/20000 rpm (Tool Only)
M12 Fuel Digital adjustable torque wrench range 16.9 - 203.4 Nm length 597 mm drive speed 0-100 rpm data storage capacity 28500 entries 1/2 inch square drive, Supplied with 12V / 2.0Ah Red Li-ion battery, C12C charger and sturdy plastic case
M12 Fuel High speed ratchet brushless motor speed 450 rpm max torque up to 47 Nm length 272 mm drive square 1/4 inch (Tool Only)
M12 Fuel Compact impact ratchet max torque 75 Nm speed 200 rpm with brushless motor delivers up to 2 times longer motor life drive square 3/8 inch (Tool Only)
M12 Fuel Compact impact ratchet max torque 81 Nm speed 175 rpm with brushless motor delivers up to 2 times longer motor life drive square 1/2 inch (Tool Only)
M12 Fuel Hammer drills SDS-Plus with 2-mode operation choose rotary hammer or rotation only max drilling up to 13 mm holes in poured concrete and masonry (Tool Only)
M12 Fuel Hammer drills SDS-Plus with 2-mode operation choose rotary hammer or rotation only max drilling up to 13 mm holes in poured concrete and masonry
M12 Fuel Right angle impact wrench brushless motor torque 90/160 270 Nm with auto shut-off mode prevents over tightening drive square 1/2 inch (Tool Only)
M12 Fuel Hexagon impact driver 1/4 inch with fluid-drive 4-mode drive control speed up to 0-3200 rpm max torque 50 Nm (Tool Only)
M12 Fuel Installation drill driver removable chuck system with 4 different heads brushless motor no load speed 400/600 rpm delivers torque up to 34 Nm chuck size 10 mm (Tool Only)
Pneumatic angle grinder 4 inch max speed 12000 rpm with spindle thread 3/8-24 UNF
Pneumatic impact wrench 1 inch with twin hammer max torque 1630 Nm
Pneumatic impact wrench 3/4 inch with twin hammer max torque 1420 Nm
Pneumatic reversible screwdriver max torque 10 Nm with hexagon 1/4 inch drive
Pneumatic reversible screwdriver max torque 9 Nm with hexagon 1/4 inch drive
Pneumatic key drill 1/2 inch (13 mm) power 360 W max speed 600 rpm
Balancer with stainless steel cable stroke length 2000 mm size 6.0-8.0 Kg
Pneumatic compact impact wrench 3/8 inch with single hammer max torque 415 Nm
Balancer with stainless steel cable stroke length 2000 mm size 4.0-6.0 Kg
Pneumatic reversible screwdriver max torque 24 Nm with hexagon 1/4 inch drive
Pneumatic impact ratchet max torque 70 Nm speed 150 rpm size 3/8 inch
Pneumatic 90 degree angle key drill 3/8 inch (10 mm) power 260 W max speed 2000 rpm
Pneumatic angle die grinder 120 degree 250 W with collet capacity 1/4 inch max speed 23000 rpm
Pneumatic angle die grinder 90 degree 250 W with collet capacity 1/4 inch max speed 23000 rpm
Pneumatic key drill 3/8 inch (10 mm) power 460 W max speed 3000 rpm
Balancer with stainless steel cable stroke length 1600 mm size 2.0-3.0 Kg
Balancer with stainless steel cable stroke length 1600 mm size 0.4-1.0 Kg
Compressed air blow pen, compact design with clip for fixation made of Duralumin Strength and Lightness air flow adjustable by turning, overall length 114 mm nozzle size 3 mm
Set of assorted spare chisel 5 pieces hexagon shank 10 mm for pneumatic chisel hammer Hazet 9035H/6 and 9035VH
Set of pneumatic sabre saw with support frame, adjustable in height, low weight and low vibration, saw stroke 10 mm including 3 saw blades 18 - 24 - 32 TPI, 1 reciprocating saw blade 18 TPI and 5 files
Pneumatic angle grinder with quick adjustment of protective cover without tools can be used on left or right side Spindle thread M14 x 2 for grinding wheel size 125 x 22 mm
Multi sander for removal of underseal, sealing compound, rust, corrosion, paint with continuous speed regulation via speed regulator on back of handle max 4000 rpm, Spindle thread size 9 mm
Set of Mini orbital sander 15000 rpm for working in areas with difficult access and repair work, Spindle thread M6 with hook and loop fastener contents 30 pieces in plastic box
Pneumatic belt sander continuous speed regulation via speed regulator on back of handle max 19000 rpm with automatic belt adjustment suitable for abrasive belts size 10 x 330 mm
Dies grinder, 90 degree angled for grinding, polishing, burnishing and deburring in areas that are difficult to access with collet chuck 6 mm stepless speed regulation via setting wheel 2000 - 22000 rpm overall length 155 mm
