Spare hard white nylon replacement face (Shore D57-61) 38 mm diameter for Thor split head hammer Size 2; one-piece moulding with shoulder for fracture resistance, hand-replaceable without tools.
Spare hard white nylon replacement face (Shore D57-61) 32 mm diameter for Thor split head hammer Size 1; one-piece moulding with shoulder for fracture resistance, hand-replaceable without tools.
Spare rawhide replacement face 70 mm diameter for Thor hide and copper/hide hammer Size 5; manufactured from genuine compressed water buffalo hide, triple-pressed under hydraulic pressure and seasoned for maximum durability.
Spare rawhide replacement face 50 mm diameter for Thor hide and copper/hide hammer Size 4; manufactured from genuine compressed water buffalo hide, triple-pressed under hydraulic pressure and seasoned for maximum durability.
Spare rawhide replacement face 44 mm diameter for Thor hide and copper/hide hammer Size 3; manufactured from genuine compressed water buffalo hide, triple-pressed under hydraulic pressure and seasoned for maximum durability.
Spare rawhide replacement face 38 mm diameter for Thor hide and copper/hide hammer Size 2; manufactured from genuine compressed water buffalo hide, triple-pressed under hydraulic pressure and seasoned for maximum durability.
Spare rawhide replacement face 32 mm diameter for Thor hide and copper/hide hammer Size 1; manufactured from genuine compressed water buffalo hide, triple-pressed under hydraulic pressure and seasoned for maximum durability.
Spare rawhide replacement face 25 mm diameter for Thor hide and copper/hide hammer Size A; manufactured from genuine compressed water buffalo hide, triple-pressed under hydraulic pressure and seasoned for maximum durability.
Aluminium hammer 50 mm face diameter with dual ductile aluminium faces delivering a soft metal blow as an alternative to copper hammers for non-damaging striking on precision components; cast iron head, wood handle nominal length 355 mm, 2100g
Aluminium hammer 44 mm face diameter with dual ductile aluminium faces delivering a soft metal blow as an alternative to copper hammers for non-damaging striking on precision components; cast iron head, wood handle nominal length 305 mm, 1140g
Aluminium hammer 38 mm face diameter with dual ductile aluminium faces delivering a soft metal blow as an alternative to copper hammers for non-damaging striking on precision components; cast iron head, wood handle nominal length 305 mm, 920g
Aluminium hammer 32 mm face diameter with dual ductile aluminium faces delivering a soft metal blow as an alternative to copper hammers for non-damaging striking on precision components; cast iron head, wood handle nominal length 270 mm, 630g
Aluminium hammer 25 mm face diameter with dual ductile aluminium faces delivering a soft metal blow as an alternative to copper hammers for non-damaging striking on precision components; cast iron head, wood handle nominal length 230 mm, 300g
Round solid copper mallet 44 mm dia machined from 99.9 percent pure electrolytic copper rod for firm, positive non-damaging blows on highly finished or closely ground machined components; plastic handle length 305 mm, 1330g
Round solid copper mallet 38 mm dia machined from 99.9 percent pure electrolytic copper rod for firm, positive non-damaging blows on highly finished or closely ground machined components; plastic handle length 290 mm, 950g
Round solid copper mallet 25 mm dia machined from 99.9 percent pure electrolytic copper rod for firm, positive non-damaging blows on highly finished or closely ground machined components; wood handle nominal length 250 mm, 360g.
Thorace dead-blow nylon hammer 63 mm face diameter and a steel-shot filled hollow head to eliminate rebound and maximise impact energy transfer with a shock-absorbent rubber grip and white nylon faces (Shore D57-61) weighs 1850 g
Thorace dead-blow nylon hammer 50 mm face diameter and a steel-shot filled hollow head to eliminate rebound and maximise impact energy transfer with a shock-absorbent rubber grip and white nylon faces (Shore D57-61) weighs 1150 g
Thorace dead-blow nylon hammer 44 mm face diameter and a steel-shot filled hollow head to eliminate rebound and maximise impact energy transfer with a shock-absorbent rubber grip and white nylon faces (Shore D57-61) weighs 900 g
Thorace dead-blow nylon hammer 38 mm face diameter and a steel-shot filled hollow head to eliminate rebound and maximise impact energy transfer with a shock-absorbent rubber grip and white nylon faces (Shore D57-61) weighs 700 g
Thorace dead-blow nylon hammer 32 mm face diameter and a steel-shot filled hollow head to eliminate rebound and maximise impact energy transfer with a shock-absorbent rubber grip and white nylon faces (Shore D57-61) weighs 550 g
White rubber mallet (Shore A 90) 90 mm dia head engineered to leave no marks on work surfaces, suited for woodworking, window frame assembly, and shopfitting applications; self-locking wood handle 380 mm length, 1350g.
White rubber mallet (Shore A 90) 74 mm dia head engineered to leave no marks on work surfaces, suited for woodworking, window frame assembly, and shopfitting applications; self-locking wood handle 380 mm length, 850g.
White rubber mallet (Shore A 90) 64 mm dia head engineered to leave no marks on work surfaces, suited for woodworking, window frame assembly, and shopfitting applications; self-locking wood handle 340 mm length, 625g.
White rubber mallet (Shore A 90) 54 mm dia head engineered to leave no marks on work surfaces, suited for woodworking, window frame assembly, and shopfitting applications; self-locking wood handle 320 mm length, 375g.
Standard black rubber mallet (Shore A 90) 90 mm dia head for general-purpose industrial striking with minimal rebound, compliant to DIN specification; self-locking wood handle, 380 mm length, 1200g.
Standard black rubber mallet (Shore A 90) 74 mm dia head for general-purpose industrial striking with minimal rebound, compliant to DIN specification; self-locking wood handle, 380 mm length, 800g.
Standard black rubber mallet (Shore A 90) 64 mm dia head for general-purpose industrial striking with minimal rebound, compliant to DIN specification; self-locking wood handle 340 mm length, 550g.
Standard black rubber mallet (Shore A 90) 54 mm dia head for general-purpose industrial striking with minimal rebound, compliant to DIN specification; self-locking wood handle 320 mm length, 310g.
Super plastic hammer 70 mm face diameter with dual UHMW polythene faces offering high impact strength and abrasive resistance for non-marking industrial striking; cast iron head, wood handle nominal length 405 mm, 3100g.
Super plastic hammer 50 mm face diameter with dual UHMW polythene faces offering high impact strength and abrasive resistance for non-marking industrial striking; cast iron head, wood handle nominal length 355 mm, 1900g.
Super plastic hammer 44 mm face diameter with dual UHMW polythene faces offering high impact strength and abrasive resistance for non-marking industrial striking; cast iron head, wood handle nominal length 305 mm, 1300g.
Super plastic hammer 38 mm face diameter with dual UHMW polythene faces offering high impact strength and abrasive resistance for non-marking industrial striking; cast iron head, wood handle nominal length 305 mm, 790g.
Super plastic hammer 32 mm face diameter with dual UHMW polythene faces offering high impact strength and abrasive resistance for non-marking industrial striking; cast iron head, wood handle nominal length 270 mm, 590g.
Super plastic hammer 25 mm face diameter with dual UHMW polythene faces offering high impact strength and abrasive resistance for non-marking industrial striking; cast iron head, wood handle nominal length 230 mm, 270g.
Super plastic pear-shaped mallet with UHMW polythene head for high-impact, corrosion-resistant, non-marking striking in metalwork and general assembly; resistant to fracture, splintering, and most chemicals, wood handle, 70mm dia, 125mm length, 395g.
Super plastic pear-shaped mallet with UHMW polythene head for high-impact, corrosion-resistant, non-marking striking in metalwork and general assembly; resistant to fracture, splintering, and most chemicals, wood handle, 60mm dia, 125mm length, 280g.
Super plastic pear-shaped mallet with UHMW polythene head for high-impact, corrosion-resistant, non-marking striking in metalwork and general assembly; resistant to fracture, splintering, and most chemicals, wood handle, 50mm dia, 125mm length, 200g.
Super plastic cylindrical mallet 80 mm dia with UHMW polythene head for heavy-duty high-impact, corrosion-resistant, non-marking striking in industrial assembly and metalwork; resistant to fracture, splintering, and most chemicals, wood handle length 355 mm.
Super plastic cylindrical mallet 70 mm dia with UHMW polythene head for high-impact, corrosion-resistant, non-marking striking in lead forming, metalwork, and general assembly; resistant to fracture, splintering, and most chemicals, wood handle length 340 mm
Super plastic cylindrical mallet 60 mm dia with UHMW polythene head for high-impact, corrosion-resistant, non-marking striking in lead forming, metalwork, and general assembly; resistant to fracture, splintering, and most chemicals, wood handle length 340 mm
Super plastic cylindrical mallet 50 mm dia with UHMW polythene head for high-impact, corrosion-resistant, non-marking striking in lead forming, metalwork, and general assembly; resistant to fracture, splintering, and most chemicals, wood handle length 285 mm
Super plastic cylindrical mallet 45 mm dia with UHMW polythene head for high-impact, corrosion-resistant, non-marking striking in lead forming, metalwork, and general assembly; resistant to fracture, splintering, and most chemicals, wood handle length 285 mm
Super plastic cylindrical mallet 40 mm dia with UHMW polythene head for high-impact, corrosion-resistant, non-marking striking in lead forming, metalwork, and general assembly; resistant to fracture, splintering, and most chemicals, wood handle length 280 mm
Barrel-shaped weighing 750 g, laminated compressed wood mallet with density 1.3 head and flushed-in glass fibre hoops for heavy-duty impact resistance in hot work, steel plate trade, and aviation applications; conical self-locking taper handle length 140 mm, 67 mm head diameter
Barrel-shaped weighing 525 g, laminated compressed wood mallet with density 1.3 head and flushed-in glass fibre hoops for heavy-duty impact resistance in hot work, casting, and aluminium forming applications; conical self-locking taper handle length 120 mm, 58 mm head diameter
Barrel-shaped weighing 310 g, laminated compressed wood mallet with density 1.3 head and flushed-in glass fibre hoops for heavy-duty impact resistance in hot work, steel plate, and general assembly applications; conical self-locking taper handle length 100 mm, 48 mm head diameter
Thorex nylon hammer with 63 mm diameter face and dual hard white nylon screw-in faces (Shore D57-61), making it ideal forheavy-duty assembly work, provides mark-free striking and has a chrome-plated zinc head with wooden handle length 355 mm.
Premium Industrial Hammers, Soft-Face Mallets & Dead-Blow Tools for Non-Destructive Striking
Maximize your strike velocity, impact safety, and surface protection with ConnexTool’s extensive inventory of professional-grade industrial hammers and modular soft-face mallets. We distribute elite manual striking instruments engineered by world-leading manufacturing giants, including Halder, PB Swiss Tools, Wiha, Thor, Hazet, and Stahlwille. Built to fulfill the strict constraints of precision mold setup, damage-free mechanical assembly, aircraft maintenance, and high-safety electrical installations, our inventory guarantees perfect impact transmission and structural longevity.
Advanced Dead-Blow Metallurgy, Split-Housing Safety & Ergonomic Vibration Damping
The premium dead-blow hammers and modular SIMPLEX systems in our catalog are manufactured in strict compliance with international safety standards. Our non-rebound steel tube architectures (such as Halder SUPERCRAFT) utilize internal steel shot pellets that shift forward upon impact, completely dampening destructive rebound shocks to protect user joints while delivering 100% force to the workpiece. Paired with ultra-dense shatterproof nylon inserts, specialized non-sparking copper faces, or premium shock-absorbing hickory and fiberglass handles, these tools eliminate component denting and premature handle failure.
A Comprehensive Modular Striking Catalog for Complex Industrial Tasks
Our technical hand tool inventory spans across all specialized materials, interchangeable inserts, and weights:
- ✔ Dead-Blow & Non-Rebound Hammers: Structural steel tube bodies paired with wear-resistant nylon or solid copper faces optimized for precise, fatigue-free industrial assembly.
- ✔ SIMPLEX Soft-Face Mallets & Cast-Iron Housings: Intelligent split-housing mechanisms allowing seamless manual replacement of wood handles and custom inserts.
- ✔ Interchangeable Spare Insert Faces: Comprehensive choices of soft rubber (95 Shore A), medium superplastic, ultra-hard UHMW plastic, and heat-resistant soft metals down to 22 mm–60 mm.
- ✔ Specialized Electrician & Machinist Hammers: VDE insulated claw formats and forged steel locksmith tools designed for heavy mechanical maintenance and electrical infrastructure.
Invest in professional-grade striking systems at ConnexTool, featuring 100% authentic inventory sourced directly from authorized European tool repositories.
