Kukko 15-K
฿17,390.00
Set of bearing separator for removal of ball bearings, roller bearings, inner rings, and other components on shafts, separation diameter 8 – 60 mm includes separator, puller as and 2 pieces of extensions length 250 mm
In stock
Click to see DATASHEET| Weight | 2.861 kg |
|---|---|
| BRAND | KUKKO |
| MPN | Kukko 15-K |
| GTIN/EAN | 4021176007941 |
Related products
Machine vise with a wide jaw, spindle with hexagon nut and handling, jaws grooves with a prismatic cut allowing round, angular and flat parts to be clamped overall length 250 mm jaws width 90 mm max clamping 60 mm
Set of sliding hammer and ball bearing puller for internal bearings, bearing outer rings, and bushings, internal diameter 6 - 19 mm as well as components with thread M3 - M18 19 pieces in handy plastic case
Puller chuck for pulling off bearing inner rings on alternators and electric motors, stability and ease of use, thus ensures safe pulling suitable for bearing inner rings diameter 5 - 32 mm
Extra strong 3-jaw puller with robust and adjustable standard jaws for pulling bearings, gears, and discs depth clamping 200 mm outside clamping width 105 - 375 mm inside clamping width 220 - 500 mm Max tractive force 15T
3-jaw puller with self-centering jaws and force-amplifying mechanism, for removal of bearings, gears, and discs in tight and hard-to-reach spaces depth reach 150 mm clamping width 4 - 150 mm Max tractive force 2.5T
Machine vise with a wide jaw, spindle with hexagon nut and handling, jaws grooves with a prismatic cut allowing round, angular and flat parts to be clamped overall length 180 mm jaws width 70 mm max clamping 40 mm
Set of professional seal removal for removing Simmerringe eg. oil seal, radial shaft seals, sealing sleeves, gaskets, bearing seals, and shaft seals 7 pieces in robust L-BOXX plastic case
Set of slide hammer 1 kg impact weight 250 mm impact stroke ergonomically shaped, solid sliding piece allows the applied force to be optimally transmitted, with female thread connection M10, including thread adaptor size M3 - M18
Hand vise with a wide jaw, spindle with hexagon nut, jaws grooves with a prismatic cut allowing round, angular and flat parts to be clamped overall length 145 mm jaws width 52 mm max clamping 28 mm
Hand vise pointed jaws, spindle with wing nut, jaws grooves with a prismatic cut allowing round and angular parts to be clamped overall length 120 mm jaws width 13 mm max clamping 20 mm
Extra strong 3-jaw puller with robust and adjustable standard jaws for pulling bearings, gears, and discs depth clamping 200 mm outside clamping width 125 - 520 mm inside clamping width 280 - 600 mm Max tractive force 20T
Hand vise with a wide jaw, spindle with hexagon nut, jaws grooves with a prismatic cut allowing round, angular and flat parts to be clamped overall length 160 mm jaws width 58 mm max clamping 35 mm