| Weight | 2.081 kg |
|---|---|
| BRAND | HAZET |
| MPN | 1779-55 |
| GTIN/EAN | 4000896136407 |
Hazet 1779-55
฿11,090.00
Ball joint puller for removing the ball joint pivot from e.g. Steering tie rod, stabilizer made of high quality steel galvanised-burnished jaw width 55 mm clamping depth 80 mm
| SIZE: 55 mm |
In stock
Click to see DATASHEETRelated products
Machine vise with a wide jaw, spindle with hexagon nut and handling, jaws grooves with a prismatic cut allowing round, angular and flat parts to be clamped overall length 250 mm jaws width 90 mm max clamping 60 mm
Set of 3-jaw universal puller with narrow jaws for pulling bearings, gears, and discs depth clamping 100/200/250 mm outside clamping width 8 - 130 mm inside clamping width 70 - 180 mm Max tractive force 3T
Extra strong 3-jaw puller with robust and adjustable standard jaws for pulling bearings, gears, and discs depth clamping 200 mm outside clamping width 125 - 520 mm inside clamping width 280 - 600 mm Max tractive force 20T
Puller chuck for pulling off bearing inner rings on alternators and electric motors, stability and ease of use, thus ensures safe pulling suitable for bearing inner rings diameter 5 - 32 mm
Extra strong 3-jaw puller with robust and adjustable standard jaws for pulling bearings, gears, and discs depth clamping 200 mm outside clamping width 155 - 650 mm inside clamping width 290 - 740 mm Max tractive force 20T
Universal puller with 2 parallel and slender jaws for pulling bearings, gears, and discs depth clamping 100 mm outside clamping width 28 - 100 mm inside clamping width 80 - 105 mm Max tractive force 2T
Set of professional seal removal for removing Simmerringe eg. oil seal, radial shaft seals, sealing sleeves, gaskets, bearing seals, and shaft seals 7 pieces in robust L-BOXX plastic case
2-jaw puller with self-centering jaws and force-amplifying mechanism, for removal of bearings, gears, and discs in tight and hard-to-reach spaces depth reach 150 mm clamping width 4 - 150 mm Max tractive force 2.5T
Hand vise with a wide jaw, spindle with hexagon nut, jaws grooves with a prismatic cut allowing round, angular and flat parts to be clamped overall length 200 mm jaws width 65 mm max clamping 45 mm
Set of ball bearing puller, for non-destructive removal of deep groove ball bearings without disassembly of the shaft, secure removal of wide range of bearing diameters 60 pieces in robust L-BOXX plastic case
Hand vise with a wide jaw, spindle with hexagon nut and handling, jaws grooves with a prismatic cut allowing round, angular and flat parts to be clamped overall length 200 mm jaws width 85 mm max clamping 50 mm
Set of slide hammer 1 kg impact weight 250 mm impact stroke ergonomically shaped, solid sliding piece allows the applied force to be optimally transmitted, with female thread connection M10, including thread adaptor size M3 - M18


















