Crimping pliers with less expenditure of force due to an optimal force transmission ratio overall length 150 mm for non-insulated cable and plug-type connectors size 0.35 - 1.5 sq.mm
Crimping pliers soft grip handles with anti-slip covers for insulated terminal size 0.5-6.0 sq.mm length 220 mm creation of conductor crimp and insulation crimp in one working step
Fuel line pliers with 2-component plastic handle length 235 mm for use when replacing the fuel filter
Fuel line pliers with solid plastic body Light-weight length 155 mm for remove the quick-release covers with light pressure on the fuel line
Valve stem sealing ring pliers with hardened jaws and with dip coating for avoiding damage to the valve timing length 250 mm
Adjustable wrench 15 degree head angle made of special steel phosphate finish with scale at jaws length 206 mm maximum clamping range 29 mm
Bumper tubular socket wrench 1/4 inch square drive for tighten and loosen of the rear bumper screw connection overall length 160 mm hexagon size 8 mm
Bumper tubular socket wrench 1/4 inch square drive for tighten and loosen of the rear bumper screw connection overall length 160 mm hexagon size 10 mm
Oil service wrench made of special steel chrome-plated for oil filler screw on M8 gearbox length 237 mm inside-hexagon 14 outside-hexagon 17 mm
Hexagon bit size 8 mm (5/16 inch) permanent hardness of 59-61 HRC for installing, removing and adjusting the driver and passenger door XZN profile size M12
Hexagon bit size 8 mm (5/16 inch) permanent hardness of 59-61 HRC for installing, removing and adjusting the driver and passenger door XZN profile size M8
Hexagon bit size 8 mm (5/16 inch) permanent hardness of 59-61 HRC for installing, removing and adjusting the driver and passenger door XZN profile size M10
Hexagon bit size 8 mm (5/16 inch) permanent hardness of 59-61 HRC for installing, removing and adjusting the driver and passenger door Torx profile size T45
Shock absorber crown wrench made of high quality steel chrome-plated diameter size 14.5 mm width of pins 5 mm with hexagon drive 22 mm
Shock absorber socket 1/2 inch square drive for Removal and installation of the front spring struts chrome-plated with 6-point profile length 85 mm size 22 mm
Shock absorber socket 1/2 inch square drive for Removal and installation of the front spring struts chrome-plated with 12-point profile length 85 mm size 21 mm
Impact mandrel made of brass for knocking eg. bushings, bearing rings, bolts in and out of place diameter 20 mm overall length 200 mm weight 0.52 kg
Set of Impact bit screwdriver Switchable (right- and left-hand threads) for loosening or tightening of tight screws up to 80 Nm torque with assorted screwdriver bits 5/16 inch C8 in robust ABS plastic box
Impact bit screwdriver Switchable (right- and left-hand threads) for loosening or tightening of tight screws up to 80 Nm torque overall length 165 mm use with screwdriver bits 5/16 inch C8
Set of assorted screwdriver bits 1/4 inch C6.3 made of stainless steel with bit adaptor and plastic screwdriver handle as storage 10 pieces can be used wherever necessary
Screwdriver bit holder with flexible shaft, allows you to reach even the tight of spaces, length 200 mm with black plastic handle for screwdriver bit 1/4 inch C6.3
Set of screwdriver bit 1/4 inch C6.3 consisting of SL / PH / PZ / Hex / Torx / Tamper-resistant Torx and quick release bit holder 51 pieces in case allowing better overview and faster access
Set of screwdriver bit 1/4 inch C6.3 consisting of SL / PH / PZ / Hex / Torx / Tamper-resistant Torx and quick release bit holder 36 pieces in case allowing better overview and faster access
Hexagon socket 1/4 inch square drive with 6-points traction profile size 4-14 mm and assorted screwdriver bits with extension bar, adaptor and bit ratchet 50 pieces on soft foam insert Safety-Insert-System (SIS) in SmartCase
Compact tube cutter for handling in confined space made from die-cast zinc with 2 guide rollers suitable for cutting aluminium, copper and thin-walled metal tubes diameter 3 - 16 mm
Tube cutter with 4 guide rollers, integrated NOGA deburring blade and spare cutting blade store in rotary knob cap suitable for cutting aluminium, copper and thin-walled metal tubes diameter 6 - 35 mm
Pry bar (Form C) bright nickel-plated for knocking bearings and bearing sleeves in and out, installing and removing springs, bolts, sprockets overall length 400 mm
Pry bar (Form A) bright nickel-plated for knocking bearings and bearing sleeves in and out, installing and removing springs, bolts, sprockets overall length 400 mm
Pry bar (Form A) bright nickel-plated for knocking bearings and bearing sleeves in and out, installing and removing springs, bolts, sprockets overall length 400 mm
Pry bar flat and bevelled tips allow application in areas with restricted access solid square blades guarantee high power transmission with impact resistant plastic handle 3 pieces
Electronic diagonal cutter with induction-hardened cutting edges and built-in opening spring non slip plastic coated handles suitable for copper wire diameter 0.5 - 2 mm
Set of pliers for multi-purpose use 3 pieces consisting of Universal pliers 759SPC-2, Heavy-duty diagonal cutter 1802SPC-11 and Snipe nose pliers 1841SPCa-22
Torx screwdriver bits 1/4 inch hexagon drive C6.3 and 5/16 inch hexagon drive C8 size T6 - T55 with 2 each and bit adaptors 32 pieces in ABS plastic box with Safety-Insert-System
Torx bit socket 3/8 inch square drive with TIN coated size T15-T50 and Torx socket size E5-E14 with reversible ratchet and extension 21 pieces on soft foam insert Safety-Insert-System (SIS) in Plastic box
Reducer adapter chrome-plated polished with bolt for locking pin retaining reduce from 1 inch to 3/4 inch
Universal joint 1 inch square drive chrome-plated polished with bolt for locking pin retaining length 144 mm
Extension bar for socket 1 inch square drive chrome-plated polished with bolt for locking pin retaining length 200 mm
Extension bar for socket 1 inch square drive chrome-plated polished with bolt for locking pin retaining length 400 mm
Reversible ratchet 32 teeth for socket 1 inch square drive chrome-plated polished with locking pin retaining for holding socket in place and handle bar length 700 mm
Reversible ratchet 32 teeth for socket 1 inch square drive chrome-plated polished with locking pin retaining for holding socket in place for handle bar HAZET 1114
Sliding head for socket 1 inch square drive chrome-plated polished with locking pin retaining for holding socket in place length 80 mm for handle bar HAZET 1114
Handle bar chrome-plated with ball and locking pin retaining length 700 mm for sliding head HAZET 1115-1 or ratchet head HAZET 1116
Sliding T handle for socket 1 inch square drive chrome-plated polished with locking pin retaining for holding socket in place and handle bar length 700 mm
Tamper-resistant Torx bit socket 1/2 inch square drive with TIN coated for higher wear protection length 56 mm size T55H
Double box-end wrench straight design with heads offset 12-point traction profile made of chrome-vanadium chrome-plated length 113.3 mm size 8 x 9 mm
Double box-end wrench straight design with heads offset 12-point traction profile made of chrome-vanadium chrome-plated length 97.9 mm size 6 x 7 mm
Double box-end wrench straight design with heads offset 12-point traction profile made of chrome-vanadium chrome-plated length 326.7 mm size 30 x 34 mm
Double box-end wrench straight design with heads offset 12-point traction profile made of chrome-vanadium chrome-plated length 324.1 mm size 30 x 32 mm
