Spare blades with double edge, for universal paint scraper Bahco 650 made of cemented-carbide 50 times longer life than a conventional steel blade length 50 mm
Flat scrapers flat-oval shank size 25 x 5 mm durable black powder coating blade length 325 mm with carbide tip width 25 mm
Berlin pattern snips for straight cuts right cutting version with PVC dipped handles blade length 79 mm cutting capacity of sheet thickness 1 mm total length 300 mm
Flat scraper with replaceable carbide tip width 25 mm impact resistant plastic handle blade holder size 25 x 2 mm overall length 397 mm
Sandflex Bi-Metal power hacksaw blade for KASTO machines, unbreakable suitable accurate and fast cutting rates for any material length 650 mm width 50 mm thickness 2.50 mm 6 TPI
Craftsman scissors standard model blade made of stainless steel with plastic handles length 145 mm
Berlin pattern snips for straight cuts right cutting version with PVC dipped handles blade length 60 mm cutting capacity of sheet thickness 1 mm total length 250 mm
Combination shears 40 degree angle stainless steel with plastic coated handle for cutting cardboard, plastics, aluminium, brass and copper foils size 185 mm
Snips shears for short, straight and curved cuts left cutting version with PVC dipped handles blade length 42 mm cutting capacity of sheet thickness 1 mm total length 250 mm
Snips shears 25% less effort for continuous, straight and curved cuts right cutting version with soft plastic coating handles blade length 33 mm cutting capacity of sheet thickness 1.2 mm total length 260 mm
Multi‑purpose cutters MULTISNIP Master stainless steel blade for long continuous straight and curved cuts blade length 50 mm cutting capacity of sheet thickness 0.4 mm total length 235 mm
ProfCut Hardpoint handsaws with super-sharp GT-teething hardpoint teeth for long-lasting sharpness and comfortable rubberized grip suit for cutting fine to medium-thick materials, blade length 475 mm (19 inch)
Professional hacksaw frame, uniquely designed solid aluminium frame balance and precision with comfortable soft grip handle, overall length 395 mm supplied with Sandflex Bi-Metal blade length 300 mm 24 TPI
Professional hacksaw frame, steel tube core plastic coated frame for straight accurate cutting with comfortable soft grip handle, overall length 390 mm supplied with Sandflex Bi-Metal blade length 300 mm 24 TPI
Set of PickTool with multicraft handle 5-piece in compact roll-up case, for seal and O-ring removal and installation in engines, transmissions and brakes. Knurled grip area and structured handle for a secure hold in oily conditions. Precisely tip, high hardness, extremely hard-wearing
L-Tip PickTool with multicraft handle, for seal and O-ring removal in engines, transmissions and brakes. Hardened L-shaped tip; knurled grip area and structured handle for a secure hold in oily conditions. Tip diameter 3 mm, blade length 80 mm, overall length 150 mm.
Curved Tip PickTool with multicraft handle, for seal and O-ring removal in engines, transmissions and brakes. Hardened curved tip; knurled grip area and structured handle for a secure hold in oily conditions. Tip diameter 3 mm, blade length 80 mm, overall length 150 mm.
Hook PickTool with multicraft handle, for seal and O-ring removal in engines, transmissions and brakes. Hardened hook tip; knurled grip area and structured handle for a secure hold in oily conditions. Tip diameter 3 mm, blade length 80 mm, overall length 150 mm.
Tip PickTool with multicraft handle, for seal and O-ring removal in engines, transmissions and brakes. Hardened straight rounded tip; knurled grip area and structured handle for a secure hold in oily conditions. Tip diameter 3 mm, blade length 80 mm, overall length 150 mm.
Elbow PickTool with multicraft handle, for seal and O-ring removal in engines, transmissions and brakes. Hardened rounded tip; knurled grip area and structured handle for a secure hold in oily conditions. Tip diameter 3 mm, blade length 80 mm, overall length 150 mm.
Compact seal scraper with multicraft handle, for removing sealing and adhesive residues. Short blade for confined spaces; structured handle for a secure hold in oily conditions. Blade length 50 mm, overall length 160 mm.
Long seal scraper with multicraft handle, for removing sealing and adhesive residues. Long blade for hard-to-access places; structured handle for a secure hold in oily conditions. Blade length 145 mm, overall length 255 mm.
Long brad awl / pricker for pre-piercing sheet metal, wood, plastic and leather. Hard-wearing tip; chrome-plated; pentagonal spherical handle for pain-free high-pressure use. Tip dimeter 7 mm, point length 110 mm, overall length 200 mm.
Brad awl / pricker for pre-piercing sheet metal, wood, plastic and leather. Hard-wearing tip; pentagonal spherical handle for pain-free high-pressure use impact-resistant and oil/gasoline resistant. Tip dimeter 5 mm, point length 80 mm, overall length 155 mm.
Scriber with tungsten-carbide point, cap and clip, for hard materials (Less than 40 HRC). Extremely Hard-wearing tip; chrome-plated corrosion protection; compact and slim handle. Tip diameter 4 mm, point length 20 mm, overall length 135 mm.
Angular scriber for precise scribing and scoring of surfaces. Precision-machined, double-ground tips; chrome-plated for lasting corrosion protection; lightweight, easy-to-clean plastic middle handle section. Overall length 220 mm.
Straight (A) tungsten-carbide replacement tip for the PB 702 angular scriber, for use on hard materials below 40 HRC. Precise scribing and scoring of surfaces; interchangeable to save cost and reduce waste; chrome-plated for lasting corrosion protection.
Curved (B) tungsten-carbide replacement tip for the PB 702 angular scriber, for use on hard materials below 40 HRC. Precision-machined and double-ground for extreme durability; interchangeable to save cost and reduce waste; chrome-plated for lasting corrosion protection.
Angular scriber with tungsten-carbide points for hard materials (Less than 40 HRC). Interchangeable double-ground inserts; precise scribing and scoring of surfaces; secure handle with knurled for oily-environment grip. Overall length 220 mm.
Replacement blades for Bahco 665 scrapers are made of cemented carbide and stay sharp and productive for up to 50 times longer with double-edge blade can be easily turned and repositioned for different radii or angles
Heavy-duty paint scraper has carbide blades with a width of 60 mm, making it ideal for power scraping or large areas, with 2-component handle provides a better grip and excellent working comfort
Extra Heavy-Duty cutter with dial blade lock mechanisms, made of stainless steel cover with comfortable elastomer grips ribbed for non-slip performance tough and light-weight equipped with 25 mm-blades
Heavy-Duty cutter with auto blade lock mechanisms, made of stainless steel with plastic ergonomic grip surrounds an extra-thick blade sleeve equipped with 3 of 18 mm-blades
Heavy-Duty cutter with dial blade lock mechanisms, made of stainless steel cover with comfortable elastomer grips ribbed for non-slip performance tough and light-weight equipped with 1 of 18 mm-blades
General purpose cutter with dial blade lock mechanisms, made of high quality stainless steel handy, tough, sleek and lightweight equipped with 3 of 9 mm-blades
General purpose cutter with slide blade lock mechanisms, made of high quality stainless steel handy, tough, sleek and lightweight equipped with 3 of 9 mm-blades
All-purpose cutter with slide blade lock mechanisms, made of stainless steel cover with comfortable elastomer grips ribbed for non-slip performance tough and light-weight equipped with 1 of 9 mm-blades
Universal cutter with slide blade lock mechanisms, made of stainless steel covered with blue slim plastic handle tough and light-weight equipped with 3 of 9 mm-blades
Universal cutter with slide blade lock mechanisms, made of stainless steel covered with red slim plastic handle tough and light-weight equipped with 3 of 9 mm-blades
Universal cutter with slide blade lock mechanisms, made of stainless steel covered with yellow slim plastic handle tough and light-weight equipped with 3 of 9 mm-blades
Shears for electricians ideal for stripping, skinning, cutting and crimping wire-end sleeves size 1 - 5 sq.mm overall length 160 mm max cutting 50 sq.mm including the protective cover with retaining clip
Set of Countersink bit 1/4 inch hexagon drive C6.3 made of High-quality HSS steel overall length 35 mm 5 pieces for screw size M3 - M8 in plastic box
Countersink bit 1/4 inch hexagon drive C6.3 made of High-quality HSS steel overall length 35 mm for screw size M10 cutting diameter 3.5 - 20.5 mm
Countersink bit 1/4 inch hexagon drive C6.3 made of High-quality HSS steel overall length 35 mm for screw size M8 cutting diameter 3.2 - 16.5 mm
Countersink bit 1/4 inch hexagon drive C6.3 made of High-quality HSS steel overall length 35 mm for screw size M6 cutting diameter 2.8 - 12.4 mm
Countersink bit 1/4 inch hexagon drive C6.3 made of High-quality HSS steel overall length 35 mm for screw size M5 cutting diameter 2.5 - 10.4 mm
